This document describes the steps required to install squid proxy server from http://squid-cache.org and webmin from http://webmin.com on a debian 4.0 system as well as basic steps required to configure squid to listen on multiple ip addresses and use them as outgoing source address for connections. This will also show you how to configure squid from webmin to accept connections only from predefined clients based on the client's ip address.
For the steps presented below root access over ssh on the server or physical ( console ) access will be required.
Installing squid on a debian system is straight forward. The administrator must be logged in as root and just type: apt-get install squid. This will install squid along with all required dependencies (it may ask for the user permission to install, in that case just approve ).
download the webmin .deb package from http://webmin.com/download.html and upload it on your server, then type: dpkg -i webmin_1.xyz.deb where xyz is the current webmin version.
This will look for required dependencies and will let you know if something is missing. In case anything is missing you can just install it using apt-get install command simiar to how you installed squid.
Once webmin is installed you can access it over web from your browser like https://yourdomain.com:10000
If wedmin and squid were both installed from the standard debian package then webmin should already know where squid configuration files are and be able to modify it and stop/start squid. If this is not the case then you can set the paths in the module's configuration section.
Squid Anonymous configuration
Set http_port to specify the port and ips where squid will listen for incoming connections. If you want squid to listen on any of the available ips just set it like this: http_port 3128
Make squid anonymous by specifying which headers it should allow/deny. For highly anonymous proxies here is the suggested configuration:
header_access Allow allow all
header_access Authorization allow all
header_access WWW-Authenticate allow all
header_access Proxy-Authorization allow all
header_access Proxy-Authenticate allow all
header_access Cache-Control allow all
header_access Content-Encoding allow all
header_access Content-Length allow all
header_access Content-Type allow all
header_access Date allow all
header_access Expires allow all
header_access Host allow all
header_access If-Modified-Since allow all
header_access Last-Modified allow all
header_access Location allow all
header_access Pragma allow all
header_access Accept allow all
header_access Accept-Charset allow all
header_access Accept-Encoding allow all
header_access Accept-Language allow all
header_access Content-Language allow all
header_access Mime-Version allow all
header_access Retry-After allow all
header_access Title allow all
header_access Connection allow all
header_access Proxy-Connection allow all
header_access Cookie allow all
header_access Set-Cookie allow all
header_access All deny all
Some may want to remove the lines that contain Cookie and Set-Cookie headers but if you do that most sites will not work anymore cause most require cookie / session support.
Squid multiple ip configuration
We want connections that come from one ip to go out on the same ip. First set acls to identify the ips where squid listens for incoming connections. Let's say we have 3 ips : 10.0.0.1 , 10.0.1.1 and 10.0.2.1 . The acls would look like this:
acl in_10_0_0_1 myip 10.0.0.1/32
acl in_10_0_1_1 myip 10.0.1.1/32
acl in_10_0_2_1 myip 10.0.2.1/32
Now you can set up tcp_outgoing address using the above acls:
tcp_outgoing_address 10.0.0.1 in_10_0_0_1
tcp_outgoing_address 10.0.1.1 in_10_0_1_1
tcp_outgoing_address 10.0.2.1 in_10_0_2_1
Set up access rules based on client ip
You will have to set up acls similar to the above but they identify the client's ip ( not proxy server's ip). The the acls will be used in the http_access directive. This can be done directly from the configuration file.
Here is a sample that shows how to allow access for a client with the ip 10.0.0.10 :
acl cli_10_0_0_10 src 10.0.0.0.10
http_access allow cli_10_0_0_10
Just put those two lines in squid.conf before the â€œhttp_access deny Allâ€ line.
You can also add an ACL from webmin -> Servers -> Squid Proxy Server -> Access Control ->> Edit Acl . The acl type has to be â€œClient addressâ€ . You just have to set a name and a â€œFrom addressâ€ ( the address you want to allow access to squid ) for it and then save it. After you set the ACL you have to go to "Add proxy restriction" , set the Action on â€œAllowâ€ , select your acl from the "Match ACLs" box and click save. After the save you should be redirected on the main acls page where you should see your acl in the â€œProxy restrictionsâ€ list, right at the bottom.
You will have to make sure your acl goes before the â€œDeny allâ€ entry or else it will have no effect. You can put it one row up by clicking the â€œUpâ€ arrow.
Now you can Start/Restart squid from command line /etc/init.d/squid start/restart or from webmin -> squid proxy server
You can test your squid configuration by setting any of the available ips as a HTTP proxy in your browser ( port 3128 ) and then go to http://spotip.com . That site should show you the exact ip you have set up as proxy in your browser.